Programmable Muffle Furnaces
SETTING THE STANDARD IN EVERY LAB

• 1125°C maximum with 24-step programmability
• Dual temperature control for overtemperature protection

·No More Ruined Samples:
Restart feature allows for programming of the unit to Restart, Hold, or Shut Down after a momentary power loss.  In overtemperature conditions, the microprocessor automatically cuts power to the heating elements and alerts by flashing the appropriate code

·24-Step Programmability:
Allows up to 12 heating/cooling ramps or dwell periods up to 99hours 59min each to be specified in any combination.  The 24-ramp/soak profiles can be repeated continuously for an infinite number of cycles

·Personal Safety Features:
Asbestos-free, multiplayer insulation prevents heat form reaching the unit’s surface, while the microprocessor cuts power to the heating elements whenever the door is opened 

·Three Chamber Capacities to Fit Any Lab:
Available in 0.14 cu. ft., 0.58 cu. ft. and 1.26 cu. ft. capacities

·Warranty:
All units are covered by a two-year warranty on parts, labor, and travel.

·Universal Applications:
Ideal for performing precipitate drying, enameling, ash determinations, fusions, ignitions, tempering and more…  They even permit atmosphere other than air to be injected easily through the 9.5mm injection port

PROGRAMMABLE FORCED-DRAFT FURNACES

MODEL NO.

SETPOINT ACCURACY

TEMPERATURE
RANGE

UNIFORMITY
(at 500°C to 1125°C)

EXTERIOR DIMENSIONS,
L x W x H

INTERIOR DIMENSIONS,
L x W x H

+/-5°C

49 x 37 x 50cm
19_3/8 x 14.5 x 19.5”

+/-8°C

59 x 55 x 55cm
23_3/8 x 21.5 x 21.5”

Ambient to 1125°C

+/-10°C

59 x 55 x 72cm
23_3/8 x 21.5 x 28.5”