Programmable Forced-Draft Furnaces
SETTING THE STANDARD IN EVERY LAB

• 1125°C maximum with 24-step programmability
• Four program storage capability
• Meet ASTM D 3174 requirements

·24-Step Programmability:
Each unit’s integral microprocessor lets you tailor a heating program for ash and/or volatiles given any sample or method

·Maximum Air Reproducibility:
Incoming air passes directly over heater as it enters the chamber.  The result is exceptional temperature uniformity coupled with the ability to achieve two to four air changes per minute

·Microprocessor Alerts of Problem:
Program the microprocessor to alert you of deviations form 1°C to over 100°C from the setpoint

·Three Chamber Capacities to Fit Any Lab:
Available in 0.14 cu. ft., 0.58 cu. ft. and 1.26 cu. ft. capacities

·User Safety:
Multi-layer, asbestos-free internal insulation prevents heat form reaching the furnace exterior, making outside surface cool to the touch, preventing burns

·Universal Applications:
Ideal for ashing a variety of samples such as coal, food, pharmaceuticals, chemicals, and paper. Use them as standard muffle furnaces for firing or annealing glass or ceramic specimens, solid-state inorganic reactions, rock and mineral fusions, sample drying, and tempering

·Warranty:
All units are covered by a two-year warranty on parts, labor, and travel. 

PROGRAMMABLE FORCED-DRAFT FURNACES

MODEL NO.

SETPOINT ACCURACY

TEMPERATURE
RANGE

UNIFORMITY
(at 500°C to 1125°C)

EXTERIOR DIMENSIONS,
L x W x H

INTERIOR DIMENSIONS,
L x W x H

+/-5°C (fan off)
+/-8°C (fan on)

49 x 37 x 50cm
19_3/8 x 14.5 x 19.5”

+/-8°C (fan off)
+/-10°C (fan on)

59 x 55 x 55cm
23_3/8 x 21.5 x 21.5”

Ambient to 1125°C

+/-10°C (fan off)
+/-15°C (fan on)

59 x 55 x 72cm
23_3/8 x 21.5 x 28.5”